If your boiler is at any
fault, you would notice the blue mains indicator light on your system to be
flashing. That is when you should know that you need to reset your Worcester
Now you might be wondering about
the way you could reset your unit.
But before putting down the
steps to reset you Worcester Greenstar boiler, you need to know that different
models of the Greenstar range might have different ways to reset. That is why
we have mentioned all the ways to reset the number of models available in the
Worcester Greenstar range.
Worcester Greenstar CDi Classic Boiler Reset
To begin, press and hold the
reset button for 3 seconds.
You will notice that the
reset button and the flash indicator would stop flashing. If the reset gets
successful, you would notice the boiler running to the normal position, while
if in case the reset isn’t successful then the alert code will be displayed
again and the blue fault light will continue to flash.
To help you out we have mentioned the diagram below.
Worcester Greenstar Si & CDi Compact Boiler Reset
In case of the CDi Compact
boiler range, you simply need to press the reset button.
If the boiler gets
successfully reset then it would return to its normal operation while if in
case the reset is not successful, the alert code will get displayed again and
the blue operation light would continue to flash.
Greenstar i Boiler Reset
To reset the appliance, you
need to press reset briefly once.
Reset and a tick would get
display. If the reset gets successful, you would notice the boiler running to
the normal position, while if in case the reset isn’t successful then the alert
code will be displayed again and the blue fault light will continue to flash.
Worcester Greenstar i Junior Boiler Reset
In case of a fault you would find the
reset button to flash once per second and the blue indicator light to be continuously
To reset the system you need to press
the reset button for approximately 5 seconds.
If the boiler successfully resets, you
would find the reset button to be no longer illuminating and the mains
indicator to be no longer flashing.
In case of a fault, you will find the blue mains indicator light to be
To begin resetting your system,
you need to turn the central heating temperature knob anticlockwise to the
RESET position and hold for around 5 seconds and then turn the knob back to the
original temperature setting.
When the boiler resets the mains indicator
will no longer be flashing and the boiler would begin to function normally, dependent
on the programmer and room thermostat settings.
A reset fault condition will exist if
the electrical power to the boiler has been interrupted. Reset the boiler again
as described above.
Note- If in case the problem still exists; we would recommend you
to go for the professional help.